You may face problems when charging your e- scooter. The main part of the electric scooter is the battery. Your scooter’s performance depends highly on the performance of the batteries.
Thus, it is important to keep them in the best condition and charge them properly. The battery, wheels, and motor are the vital components of your electric scooter. If any component malfunctions, you would not be able to ride it at all.
If your electric scooter won’t charge, there is the possibility of loose connections or loose wires inside your scooter. Here are some tips about what you should do in such cases.
The ideal way to charge your electric scooter:
It is necessary to charge fully when you use your e-scooter for the very first time. 15 to 20 minutes of charging is ideal for almost all electric scooters. After each use, you could charge it for ten to twelve hours. Obviously, you have to ensure not to overcharge your scooter’s batteries.
It would reduce the durability of the system. Leaving them idle is not right. Don’t forget to charge them after they drain completely once every six weeks. If you maintain these ideal guidelines you can also increase battery life.
You could see the display panel or indicator to check the remaining quantity of the charge in your electric scooter. If the indicator shows you a full battery, it is ready to ride the scooter. There may be a system that shows the charge amount through red or green light and when you see a firm green light, it is ready to go.
Trace the problems and correct the faults in your scooter:
When the battery of your e-scooter stops charging, the problem may lie in the charger or the battery. Here are a few troubleshooting problems which may help you deal with such situations properly.
Checking the battery:
You have to check when you charged your scooter last time. If you charge it 2 or 3 days or a week before, it is okay. You have to charge it every time after using your scooter. If you charged the battery more than six months ago, there is a possibility that the battery becomes defective. It is because when the batteries lose all the charge, the chemicals and power in them run badly.
Checking the charger:
If you find the battery acceptable, probably the problem is in the charger. You could plug in your charger to check if the light indicator or power switch is flashing or not. If the charger’s indicator is not blinking, you should check your charger by using a voltmeter.
The charger should display the voltage output a little bit higher than the rating. For example, a 24-volt charger would display an output of more than 24 volts. If you find the output less than the rating, your charger may be faulty.
Inspect with touch and smell:
Some external damage may be responsible for not charging. If there are some loose wires or burnt, the battery of your e-scooter won’t charge. You could touch to check the connections to see if they are disconnected or burnt.
You could also check the damage by smelling. If the wire is burnt and frayed, you would experience a distinct and strange smell that comes from burning plastic or rubber. Overcharging or overusing could lead the necessary components or parts of your e-scooter to malfunction.
Checking for any leaks:
Battery leakage is a common fact if you don’t charge the battery completely or charge it for a long time. The chemicals in the battery are likely to leak by overcharging. You should also ensure that the temperature is ideal for storing your scooter.
Electric scooters should not be kept in places with high humidity and high temperature. Overheating has an ill impact on the components of your scooter. The existence of rodents and mice also could lead to battery leaking. If these mice chew on wires of the battery or other parts, there is a vast possibility of not charging your scooter.
Testing the damaged parts on other e-scooters:
You may not find out which components or parts are faulty in your scooter. It is a tricky task to identify these parts, so you should better be assured about that.
You could test your charger or faulty battery on another scooter. It is quite easy if you own another electric scooter but if not, you should ask your family or friends for theirs. It is an easy and quick way to identify the damage.
When you’re doing this, be cautious that the charger or the battery you attach
Another scooter should be well-matched with everything. If you don’t match it properly, you may be the reason for other scooter damage as well.
The process for charging a dead battery:
To charge your scooter’s dead battery, you should use a similar volt charger. For example, it is best to charge your 12-volt battery by using a 12-volt charger. You would not succeed if you use more voltage than your battery. A large capacity charger has more capability and power, and the battery would charge very quickly, leading to overcharging.
What charges your e-scooter battery?
Your scooter battery charges due to the charger. If it doesn’t charge, you should either replace the charging system or the battery. A classic e-scooter battery comes with a lifetime of an assured amount of charging sets. This depends on your scooter quality and battery price.
Expensive and higher capacity batteries have lower drainage and higher longevity. You may find lithium-ion batteries that have high mileage at a reasonable price.
Things that you should follow:
- Don’t forget to charge your e-scooter after every time of use.
- Keep it away from water as water could be the reason for a faulty battery.
- Clean the scooter battery correctly.
- Don’t ride on uneven and rocky surfaces.
- Don’t perform any stunts because it could harm the charging structure.
This article could be used as your e-scooter battery guide as the details above cover almost all the problems and issues of your electric scooter. The first and foremost step to solve a problem is to identify the problem. Hopefully, you could easily find out the problem and solve it!